Subsystem Kronex

Home
Production
Subsystem Kronex

Subsystem Kronex

Installation of the subsystem KRONEX is a comprehensive modern approach to the construction of terraces, floor coverings, fountains, operated roofs and other objects.

Adjustable pedestals, aluminum lags, fasteners and components that make up the subsystem were developed by specialists of Kronex Company, taking into account many years of experience in decking installation.

The elements of the subsystem are thought out to the smallest detail and meet all requirements construction.

High quality, reliability and ease of use make the subsystem KRONEX the ideal choice for any project.

Advantages of the subsystem KRONEX

Поднимает уровень настила до 1083 мм

Выравнивает в горизонтальное положение

Позволяет скрыть все инженерные коммуникации

Простой и быстрый монтаж

Температурный режим от -35 до +60 °С

Выдерживает нагрузку до 4,5 тонн

Areas of application of the subsystem KRONEX

Construction of terrace floors, gazebos, temporary decks.

Construction of fountains and other objects where pedestals may be in the water.

Installation of equipment in a strictly horizontal position.

Laying communications under the flooring with the possibility of subsequent access.

Construction of decks on foundations with large differences in height.

Construction of decks and floors on operated roofs.

What does the subsystem KRONEX consist of

Adjustable pedestals

Аllow to raise the level of the flooring to the required height, hide utility lines under the raised floor and carry out quick installation of the flooring without violation of the waterproofing of the base, including on an unprepared and uneven base.

Accessories for pedestals

A wide range of components for pedestals is used when adjusting lags, laying tiles, adjusting the angle of inclination, and increasing the height of the floor level.

Aluminum lags

Constructive, carrier, supporting - each of these types is ideal for a specific application and provides the required level of strength.

Fasteners

Made from high quality stainless steel, making it highly durable and long lasting. Guarantees a reliable connection and stability of the entire structure.

Adjustable pedestals

The Kronex Company produces adjustable pedestals and components under the KRONEX brand, designed for use in harsh climatic conditions with a sufficient margin of safety.

The products are of high quality and in many respects surpass the market leaders, which is confirmed by the test results conducted by the independent laboratory “Institute BELNIIS”.

The pedestals are made of polypropylene and can withstand loads of up to 4.5 tons!

Adjustable pedestals KRONEX were recognized as the Best Building Structure (System) of the Year within the framework of the “Best Construction Product of the Year - 2020” competition. For high technical and operational characteristics, consumer properties and a decent level of quality.

Accessories for pedestals KRONEX

By combining pedestals KRONEX with height extenders KRONEX, the deck level can be raised to any height up to 1083 mm.

And using the automatic tilt angle adjuster KRONEX, you can level the flooring plane relative to the base at an angle of up to 5.5° (9.6%)!

Height magnifier KRONEX

The height magnifier is used in conjunction with an regulated KRONEX support of 82-135 mm or 133-225 mm. The magnifier is necessary to raise the level of the installed flooring by more than 225 mm.
By combining an adjustable support with a height magnifier, it is possible to lay the mounted flooring to a height of up to 1083 mm.

Automatic regulator of the inclination angle KRONEX

It is attached to the top of the support, allows you to level the level of the flooring in a strictly horizontal position with a slope of the base up to 5.5° (9.6%).
The use of the automatic angle controller KRONEX, increases the height of the support by 21mm.

Top for the lags rotary KRONEX

The tabulator is necessary when installing the flooring on the guide logs. It is attached to the mounting holes of the top of the support.

Anti-vibration lining KRONEX

The lining is designed to dampen and minimize the impact of vibration loads from the flooring. It is attached to the top of the support with the help of tabulators, which will be used when installing the flooring.

Locking ring KRONEX

KRONEX locking ring

It is used when "splicing" the KRONEX Height Magnifier and regulated KRONEX supports 82-135 mm or 133-225 mm to avoid spontaneous "screwing" of the upper part of the support and, as a result, violation of the set level.

Tabulators KRONEX for tiles

Universal tabulators for laying tiles on supports, can be used both with an automatic tilt angle corrector, and attached directly to the top of the support.
Do not require additional pruning when laying tiles with a shift of the seam and at the edge of the flooring. Create a uniform gap between the tiles of 4 mm.

Tabulator cross KRONEX

It is used when installing tiles of any type, allows you to create a uniform and neat gap between tiles of 3 mm. It is attached to the mounting hole in the center of the top of the support.

Corrector angle tilt KRONEX

Corrector angle tilt 1 и 2 % KRONEX

It is necessary for removing the slope of the installed flooring in a strictly horizontal position. It is attached to the bottom of the support. The tabulator allows you to adjust the tilt angle manually.

Automatic regulator of the inclination angle KRONEX with tabulator for tiles

Allows to install quickly а porcelain tile flooring in a strictly horizontal position.

Attachment for regulation KRONEX

Allows to quickly screw in and unscrew the top of the pedestal, thereby changing the height. It greatly speeds up the installation of adjustable pedestals.

Automatic regulator of the inclination angle KRONEX with top for rigid fixation of lags

Serves for fastening structural and load-bearing aluminum lags KRONEX, as well as wooden beams with a width of 45 and 50 mm.

Automatic regulator of the inclination angle KRONEX with top for the lag

Allows to quickly install the log in a strictly horizontal position.

Self-adhesive anti-slip pads for pedestal KRONEX

They are used to prevent sliding of adjustable pedestals when the object has steep base slopes.

Starting spacer KRONEX

Helps to set the same gap between the decking and the adjacent wall.

Tile tabulator KRONEX with base

Creates a gap between tiles, as well as between the tile and the base.

Top for rigid fixation of lags KRONEX

Serves for rigid fastening of constructive and carrier aluminum lags KRONEX, as well as wooden beams.

Aluminum lags KRONEX

An integral and one of the most important parts of the load-bearing subsystem KRONEX are aluminum lags, to the creation of which our engineers put maximum effort and attention.

In order to optimize costs and simplify installation, the following types of logs have been developed:

Aluminum lag KRONEX supporting Slim

Unique design
Thanks to the reduced height of 15 mm, it allows to build the lowest subsystem.

Aluminum lag KRONEX supporting

Опорная алюминиевая лага с толщиной стенок в 1мм, предназначена для укладки на подготовленное основание.

Aluminum lag KRONEX constructive

Конструктивная алюминиевая лага с дополнительными поперечными ребрами жесткости и толщиной стенок в 1,2 мм может использоваться как в подсистеме с регулируемыми опорами, так и для монтажа более сложных несущих подсистем.

Aluminum lag KRONEX carrier

Несущая алюминиевая лага с толщиной стенок в 1,2 мм и дополнительными ребрами жесткости Может как укладываться на подготовленное основание, так и использоваться совместно с регулируемыми опорами Kronex.

Fasteners

Fasteners for terraces KRONEX are designed taking into account the design of aluminum lags KRONEX and include a number of unique technical solutions to ensure full support of the deck on the profile, correct load distribution and uniform gaps.

Linear connector KRONEX for lags KRONEX

Serves for linear connection of subsystem elements made of KRONEX structural aluminum lags when creating prefabricated frames and frames.
It also makes it possible to connect lags when they are joined at the ends on the finished surface or on an adjustable support.
Suitable for use with other types of KRONEX aluminum lags: load-bearing and support.

Angular connector KRONEX for lags KRONEX

Serves for connecting corner and mutually perpendicular elements from KRONEX structural aluminum lags when creating prefabricated load-bearing frames and frames.

Fastening KRONEX for end tiles 20 mm bottom

Developed by KRONEX specialists for covering the ends of the flooring on adjustable pedestals and is used in a system with top fastening.

Fastening KRONEX for end tiles 20 mm top

Developed by KRONEX specialists for covering the ends of the flooring on adjustable pedestals and is used in a system with bottom fastening.

Start fastener KRONEX for aluminum lag KRONEX

Specifically for use with KRONEX aluminum lags to secure the starting/finishing deck board.

Intermediate fastener KRONEX for aluminum lag KRONEX

Designed specifically for use with KRONEX aluminum lags, for fastening deck boards with a shelf of 7 and 9 mm.
The fastening takes place in the hidden shelf of the lag, which ensures that the board is fully supported on the aluminum profile. The bent “wings” of the clamp provide a longitudinal gap between the boards to compensate for thermal expansion and contraction of the board.
Ensures noiselessness and guarantees long service life of the deck even under intensive operation with constant vibration loads.