Pedestals Kronex

The optimal solution for leveling the site during landscaping is the use of adjustable and unregulated pedestals that maintain the stability and reliability of the entire structure.
The pedestals were designed specifically for use in harsh climatic conditions with a sufficient margin of safety. The result is a high-quality product that surpasses the market leaders in many respects, which is confirmed by the results of tests conducted by the independent laboratory "Institute BELNIIS".


Adjustable pedestals of the KRONEX brand were recognized as the Best construction structure (system) of the year in the framework of the competition "The Best construction product of the Year 2020". For high technical, operational characteristics, consumer properties and a decent level of quality.

KRONEX pedestals are applicable almost everywhere where it is necessary to raise the level of the flooring, align it with respect to the horizon and fix it. Pedestals are used on exploited roofs, in the construction of terraces, temporary decking, for the installation of equipment, in the construction of industrial floors, laying technical communications under the flooring, etc. Due to their resistance to moisture, KRONEX supports are indispensable in the construction of fountains and piers.
Adjustable pedestals allow you to raise the level of the flooring to the desired height, hide all engineering communications under the raised floor and carry out quick installation of the flooring, even on an uneven and unprepared base.
Unregulated pedestals perform a similar function as adjustable ones, however, they raise the level of the flooring to a fixed height. Tabulators for laying tiles are already built into the design of unregulated pedestals, which frees you from purchasing additional components.

 We invite building, assembling and trading companies
to become the first dealers of adjustable pedestals of the KRONEX brand in their regions

We have our own design department in the state, ready to conduct training on the product, tell its features, help with the development of the project and calculate the exact number of all necessary components.
We provide everything necessary for work: booklets, instructions, test reports, samples and examples.
All types of pedestals are supplied in a KRONEX branded box, which greatly simplifies their storage at the facility and transportation.

The adjustable pedestals of the KRONEX brand are made of high-strength polypropylene, which is able to withstand temperature conditions from -35 to +60 ° C.

The maximum height to which the flooring can be raised reaches up to 1,083 mm, and the minimum - from 18 mm.

Provided that the adjustable pedestal is fully screwed, it can withstand up to 4,500 kg. When the thread is unscrewed by 50 mm, the maximum load on one adjustable pedestal is up to 1,350 kg.

Diagram of the adjustable pedestal device:

Automatic tilt angle control up to 5.5°

It is attached to the top of the pedestal, allows you to align the level of the flooring in a strictly horizontal position;

The top of the adjustable pedestals

It is screwed directly into the base of the pedestal or into the height enlarger. It has special holes for fixing the top of the log, tabulators for tiles, anti-vibration lining. If necessary, an automatic tilt angle controller is attached to the top;

KRONEX Height magnifier

The largest KRONEX pedestal in the size range raises the level of the flooring (without loss of bearing capacity) to 225 mm.

If you need to raise the level higher, then height enlargers are used.

Each of the enlargers adds to the height of the pedestal from 105 to 140 mm.

By combining several magnifiers, it is possible to raise the level of the raised floor to 1,083 mm;

KRONEX locking ring

It is used as a retainer that prevents spontaneous twisting of the pedestal and, as a result, violation of the exposed level of the flooring height;

The base of the KRONEX pedestals

It has additional stiffeners and holes for attachment to the base (if necessary) and for drainage of surface water.

Serves as the base for the top of the pedestals or the height enlarger.

If it is necessary to install the adjustable KRONEX pedestal in a tight fit to the wall, column and other static objects, it is allowed to cut according to special markings applied to the base;

Tilt angle Corrector

It is necessary to remove the slope of the installed flooring in a strictly horizontal position. It is attached to the lower part of the pedestal and makes it possible to adjust the angle of inclination manually. By combining up to 3 correctors, it is possible to align the position of the pedestal when the base is tilted up to 6%.

An example of combining the "KRONEX 105-140 mm Height Enlarger" with adjustable KRONEX pedestals to raise the level of the flooring to any height up to 1,083 mm:

On each of the threaded connections, it is necessary to use a "KRONEX fixing ring" (art. KRN-TL) to prevent spontaneous twisting of the pedestal level and strengthen the bearing capacity.

Adjustable KRONEX pedestals have the same base diameter of 195 mm and the diameter of the top of the support is equal to 147 mm.

The pedestals platform of the top of the support has an additional reinforcement of 1 mm, and the base of the pedestal is equipped with stiffeners that increase the bearing capacity of the product.

If necessary, the pedestals can be mounted by turning 180°. To do this, at the base of the pedestals, by analogy with the tops, there are all the necessary holes for fixing tabs.

Vendor code KRN-TA05 KRN-TA0 KRN-TA1 KRN-TA2 KRN-TA3 KRN-TA4
Minimum height from 18 mm from 28 mm from 36 mm from 52 mm

from 83 mm

from 133 mm

Maximum height till 25 mm

till 40 mm

till 51 mm

till 82 mm

till 134 mm

till 225 mm
Change in height till 7 mm till 8 mm till 15 mm till 130 mm till 53 mm till 92 mm
Full thread height 27 mm 28 mm 25 mm 50 mm 73 mm 112 mm
Weight of one support 178 g 211 g 233 g 292 g 400 g 583 g
Quantity in the package 132 pcs 90 pcs 60 pcs 48 pcs 30 pcs 24 pcs
Package weight 24,6 kg 19 kg 14 kg 14,1 kg 12 kg 10,5 kg
Quantity of pedestals per pallet (12 boxes, 59x42x40 cm) 1 656 pcs 1 080 pcs 720 pcs 576 pcs 360 pcs 216 pcs

Unregulated pedestals raise the level of the flooring to a fixed height.

Due to its simplicity and ergonomics of design, this type of pedestals has a fairly low cost and helps to save significantly in the process of landscaping.

The pedestals can withstand a load of up to 4,500 kg, are easily and quickly mounted, are not subject to deformation and shrinkage, and are resistant to corrosion.


Tabulators for laying tiles are immediately integrated into the design of unregulated KRONEX pedestals, which help to maintain an even gap and allow you to save money, due to the absence of the need for additional purchase of components.


When laying the KRONEX aluminum log on unregulated KRONEX pedestals, the lag is put on the tabulators for tiles built into the pedestal and thereby eliminates the risk of displacement, plus makes the installation process much more convenient.

Vendor code KRN-T13 KRN-T14 KRN-T20 KRN-T25 KRN-T30
The height of raising the flooring 13 mm 14 mm 20 mm 25 mm 30 mm
Diameter of the pedestals 147 mm 152 mm 155 mm 155 mm 137 mm
Tile tab height 9,6 mm 9,6 mm 14,5 mm 14,5 mm 13 mm
Tab width for tile 3 mm 3 mm 3 mm 3 mm 3 mm
The distance between the dividers for laying logs 64 mm 63 mm 55 mm 55 mm 35 mm
Weight of one pedestal 56 g 49 g 72 g 86 g 87 g
Quantity in the package 220 pcs 260 pcs 200 pcs 160 pcs 170 pcs
Package weight 12,5 kg 13,0 kg 14,6 kg 14,0 kg 15,0 kg
Quantity of pedestals per pallet (12 boxes 59x42x40 cm) 2 640 pcs 3 120 pcs 2 400 pcs 1 920 pcs 2 040 pcs

The top for the KRONEX log (rotary)

It can be attached both to the top of the support and to the automatic tilt angle corrector in special holes.

It serves for reliable fixation of the lag and, if necessary, can rotate to accurately set the direction.

Vendor code Material A B C D Product weight In the package
KRN-TARx10 polypropylene 24 mm 64 mm 24 mm 6 mm 9 g 420 pcs

KRONEX tabulator cross for tiles (3 mm)

It is used when laying thickened tiles on adjustable supports, it is attached to the top of the pedestal in special holes and serves to create a smooth seam between the tiles.

It is recommended to use in conjunction with the KRONEX anti-vibration lining (art. KRN-TS1).

Vendor code Material A B C Product weight In the package
KRN-TSP3x10 polypropylene 13 mm 64 mm 3 mm 5 g 400 pcs

KRONEX tabulator for tiles (4 mm)

Universal tabulators for laying tiles, which can be used both with an automatic tilt angle corrector and attached to the top of an adjustable pedestal.

They do not require pruning when laying tiles with a seam shift and at the edge of the flooring.

Vendor code Material A B C Product weight In the package
KRN-TST4x40 polypropylene 15 mm 19 mm 4 mm 1 g 4 600 pcs

KRONEX tilt angle corrector

It is placed under the base of the pedestal and allows you to set the slope by rotating the corrector relative to the base. Using up to three correctors, you can compensate for the slope of the base from 1 to b percent.

They can only be used with KRONEX pedestals: TA-1, TA-2, TA-3 and TA-4.

Vendor code Material A D Slope value, α Product weight In the package
KRN-TSC1 polypropylene 2 mm 190 mm 1% 74 g 100 pcs
KRN-TSC2 polypropylene 2 mm 190 mm 2% 51 g 100 pcs

Anti-vibration lining

It is mounted on the top of the pedestal or on an automatic tilt angle corrector and serves to level the vibration between the flooring and the pedestals.

The holes in the lining are cut in such a way that they allow mounting any of the tabs on the pedestal.

Vendor code Material A D Product weight In the package
KRN-TS2x10 polypropylene 2 mm 137 mm 29 g 350 pcs

KRONEX locking ring

Compatible with all KRONEX pedestals, protects the pedestals from arbitrary twisting during operation and securely fixes the adjustable pedestals at a certain height.

It serves as an additional booster of the bearing capacity of the supports by increasing the thread area.

Vendor code Material A B C D Product weight In the package
KRN-TLx10 polypropylene 4 mm 10 mm 127 mm 107 mm 50 g 80 pcs

Tabulator for 2 mm KRONEX tile with base

It is used for dry laying of tiles made of porcelain stoneware on a prepared base, it is also used when laying tiles on aluminum logs.

It has a tabulator cross that helps to maintain the same gap between the tiles of 2 mm and creates a gap of 2 mm between the tile and the base.

Vendor code Material A B C D Product weight In the package
KRN-KP2 polypropylene 2 mm 2 mm 13 mm 100 mm 58 g 120 pcs

KRONEX Spacer

It is installed on the top of the pedestal and allows you to set the same gap between the flooring and the wall of the abutment. Additionally, there are tabs on the spacer, which help to set the same gap between the tiles of porcelain stoneware.

Even with prolonged vibration loads on the flooring, the spacer helps the tile stay in its place without shifting.

Vendor code Material A B C D E Product weight In the package
KRN-WS polypropylene 3 mm 3 mm 12 mm 84 mm 10 mm 40 g 100 pcs

Automatic tilt angle adjuster up to 5.5° KRONEX

It is installed directly on the top of the pedestal and aligns the flooring level automatically to a strictly horizontal position.

It is used in conjunction with tabulators for tiles (art. KRN-TST4) or with a vertex for lag (art. KRN-TAR).

Vendor code Material A B D Slope correction, α Product weight In the package
KRN-TRSC polypropylene 21 mm 120 mm 150 mm till 5,5° (9,6%) 140 g 28 pcs

Automatic tilt angle adjuster up to 5.5° KRONEX for tiles

This controller is already supplied with built-in tabulators for tiles, which allows you to significantly save time during installation.

Tabulators are one with an autocorrector, which eliminates even minimal backlash or displacement.

Vendor code Material A B C D Slope correction, α Product weight In the package
KRN-RSC3 polypropylene 21 mm 120 mm 3 mm 150 mm till 5,5° (9,6%) 117 g 24 pcs

Automatic tilt angle adjuster up to 5.5° KRONEX for lag

It is used for fixing structural and load-bearing aluminum KRONEX logs, as well as wooden beams with a width of 45 and 50 mm.

The lag is securely fixed on both sides, and the side corners do not allow moisture to shift or tip over.

Vendor code Material A B C D E F Slope correction, α Product weight In the package
KRN-RSCX polypropylene 21 mm 120 mm 25 mm 150 mm 50 mm 45 mm till 5,5° (9,6%) 250 g 20 pcs

Automatic KRONEX tilt angle controller with a top for lag

It is used for mounting aluminum KRONEX logs on pedestals. Due to the fact that the top for the lag and the pedestal platform of the autocorrector are one, the installation time is reduced, and the connection is more rigid than when using the top for the lag and the autocorrector separately.

Vendor code Material A B C D E Slope correction α Product weight In the package
KRN-RSCD polypropylene 21 mm 120 mm 25 mm 150 mm 70 mm till 5,5° (9,6%) 197 g 20 pcs

KRONEX hard lag retainer

It is mounted on the top of the pedestal, without a tilt angle corrector, serves for rigid fastening of structural and load-bearing aluminum KRONEX logs, as well as wooden beams with a width of 45 and 50 mm.

Vendor code Material A B C D Product weight In the package
KRN-TAW polypropylene 25 mm 45 mm 50 mm 120 mm 125 g 32 pcs

Nozzle for adjusting KRONEX pedestals

It is attached to a screwdriver on a hexagon and then, by applying it to the top of the pedestals, you can quickly screw and unscrew the top of the pedestals, thereby changing the height.

It is compatible with all the tops of KRONEX pedestals and speeds up the installation of adjustable pedestals at times.

Vendor code Material A Hexagon head, B D Product weight In the package
KRN-TT polypropylene 7 mm 14 mm 133 mm 110 g 45 pcs

KRONEX top mount for 20 mm end tile (for pedestals)

It is used for sewing the ends of the flooring made of tiles and WPC boards on adjustable pedestals and is used in a system with a lower mount art. KRN-0039.

The mount is compatible with all types of KRONEX aluminum logs.

Vendor code Material A B C D E Product weight In the package
KRN-0040 stainless steel 1 mm 50 mm 20 mm 174 mm 1,2 mm 61 g 10 pcs

KRONEX bottom bracket for 20 mm end tile (for pedestals)

It is used for sewing the ends of the flooring made of tiles and WPC boards on adjustable pedestals and is used in a system with an upper mount art. KRN-0040.

The mount is compatible with all types of KRONEX aluminum logs.

Vendor code Material A B C D Product weight In the package
KRN-0039 stainless steel 1 mm 50 mm 20 mm 200 mm 74 g 10 pcs

Anti-vibration self-adhesive tape for KRONEX lag

It serves to dampen vibration and helps in ventilation of flooring materials and bearing guides of the lag.

The tape has an adhesive base on one side for reliable fixation to the aluminum KRONEX log.

Vendor code Material Tape thickness (А) Width of the tape (В) Roll length Roll weight In the package
KRN-0111 styrofoam 2 mm 15 mm 20 m 250 g 1 roll

Self-adhesive anti-slip pads for KRONEX pedestals

They are placed under the base of the adjustable KRONEX pedestals to counteract the sliding of the support in case of installation on a base with a steep slope.

They serve as an additional damper between the base and the subsystem.

Vendor code Material Lining thickness (А) Lining width (В) Lining length (С) Roll weight Number of linings per roll
KRN-0112 styrofoam 2 mm 200 mm 200 mm 400 g 50 pcs

Contacts

Office: Belarus, Minsk, Filimonova str. 20, office 64, RC "Aquamarine"
Telephone: +375 (017) 510-14-42
This field is required
This field is required
Entered incorrect e-mail
This field is required

Office in Belarus

Minsk, st. Filimonova 20, office 64, RC "Aquamarine"
+375 (17) 336-97-16

Warehouse in Belarus

Minsk region, ag. Mikhanovichi, building "Evrosklad". Route
+375 (17) 336-97-16

OFFICE in Russia

Moscow, st. Leninskaya Sloboda, 26, bldg. 28 (BC "Slobodskoy")
+7 (499) 490-50-19